BHBDH - EA 9309 NA PART B
- MSDS: BHBDH
- Manufacturer: DEXTER CORP HYSOL DIV
- Product Name: EA 9309 NA PART B
- National Stock Number: 8040-01-126-6270
Product Identification
Product ID:EA 9309 NA PART B
MSDS Date:11/09/1987
FSC:8040
NIIN:01-126-6270
MSDS Number: BHBDH
Responsible Party
PITTSBURG, CA 94565
Emergency Phone: (415) 687-4201
Info Phone: (415) 687-4201
Cage: 79436
Contractor
Telephone: 202-483-7616
Cage: 33564
Ingredients
ALKYLAMINES
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: CORROSIVE, BURNS,
IRRITATION. INGESTION: MUCOUS MEMBRANES DAMAGE. INHALATION: UPPER
RESPIRATORY TRACT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: CORROSIVE, BURNS, IRRITATION,
SENSITIZATION/ALLERGIC REACTIONS. INHALATION: RESPIRATORY TRACT
IRRITATION. INGESTION: SEVERE MUCOUS MEMBRANES IRRITATION.
Medical Cond Aggravated by Exposure:SENSITIZATION, ALLERGIC SKIN
REACTIONS.
First Aid
First Aid:SKIN/EYE: FLUSH W/PLENTY OF WATER. WASH THOROUGHLY W/SOAP &
WATER OR HAND CLEANER. DON'T USE SOLVENTS. REMOVE/ WASH CLOTHES
BEFORE REUSE. IF IRRITATION PERSISTS, SEE PHYSICIAN.
Fire Fighting
Flash Point Method:TOC
Flash Point:>300F
Extinguishing Media:DRY CHEMICAL/HALON FIRE EXTINGUISHER/WATER SPRAY,
FOAM/FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE & TOXIC GASES MAY BE
LIBERATED.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE CLOTHING. SCRAPE UP & TRANSFER
TO METAL CONTAINER. WIPE UP REMAINING RESIDUE W/SOLVENTS, OBSERVING
SOLVENT FLAMMABILITY CAUTIONS.
Handling
Handling and Storage Precautions:KEEP COOL IN ACCORDANCE W/LABEL
INSTRUCTIONS. FOLLOW RECOMMENDED CURING SCHEDULE.
Other Precautions:STORE AT ROOM TEMPERATURE 77F FOR 12 MONTHS. ALKALINE
LIQUID. CORROSIVE.
Exposure Controls
Respiratory Protection:NOT NEEDED W/GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST: RECOMMENDED
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:AS NEEDED
Work Hygienic Practices:WASH THOROUGHLY WITH SOAP & WATER OR HAND
CLEANER AFTER USE.
Supplemental Safety and Health
KEY1:C2.
Chemical Properties
HCC:C2
Vapor Density:8.45
Spec Gravity:1.02
Evaporation Rate & Reference:NIL
Appearance and Odor:TRANSPARENT RED LIQUID W/AMMONIACAL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS/MINERAL ACIDS.
Stability Condition to Avoid:MIXING RESIN/CURING AGENT IN BATCHES >1 LB
TOTAL. DON'T HEAT MIXED ADHESIVE UNLESS CURING SURFACES TO BE
BONDED.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS &
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:FAILURE TO OBSERVE CAUTION MAY
RESULT IN EXCESSIVE HEAT BUILD-UP W/THE RELEASE OF TOXIC GASES.
Disposal
Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.